Product Description
EVA Flooring Foam Boat Faux Teak Mat
EVA foam Pad Decking Foam Faux Flooring Light Brown Yacht Hown - store
EVA Foam Decking Sheet Light Brown Marine Boat 35" X 95" 9/32" Thick
Light Brown over white and can easily be cut down to fit nearly any surface on a boat where non-skid, or protection for the boat's surface is required.
Elastic, not easy deformation, with high tensile elongation, not easy to tear.
Closed-cell structure, non-absorbent, moisture-proof, good water resistance
Very good resistance to seawater, grease, acid, alkali, and other chemicals corrosion
Specifications:
Product Name: Boat EVA Foam Floor Mat
Type: Teak Decking
Material: EVA (Ethylene-vinyl Acetate)
Model: SDW-52-18W
Material structure: Closed cell
Color: Light Brown with White Lines
Length: 95.67" / 243cm / (7 ft & 11-43/64 inch)
Width: 35" / 90cm / (2 ft & 11-7/16 inch)
Thickness: 0.24" / 6mm
Hardness: 50 - 55 (± 3P)
Self-adhesion: Yes
Non-skid: Yes
Life expectancy: 3-5 Years (or longer if stored in shade)
Application: boat, yacht, RV, car, vehicles, commercial floors.
Features:
Made of high quality EVA material, environmental protection, non-toxic, not changeful form, very durable.
Airtight bubble pore structure, non-absorbent, moisture-proof, excellent waterproof performance
Resistant to salt water, oil, acid, alkali and other chemical corrosion, antibacterial, non-toxic, tasteless, no pollution.
High resilience and resistance to tension, strong toughness, good shockproof and cushioning performance.
On the back of the pad with strong gum, simple installation, convenient and firm, you can easily get.
Perfectly decorate your boat, always shows your charming and highlight your boat.
Package Included:
1 ROLL x EVA Flooring Foam Boat Faux Teak Mat Decking Light Brown Yacht 35"x95"x0.26"
1 Reviews / Feedback
This is nice stuff - time will tell on how well it holds up. I used it to cover some teak hatches which allowed water between the boards. Really nice feel when walking on it. Doesn't get too hot in the sun. Bought another piece to put on my cockpit sole. I was really surprised on how well it stuck to the teak wood. I tried a couple other colors light and dark gray with black inlay to try to mimic weathered teak but it just looked wrong. The fake oiled teak color is nice. It was easy to cut though I found it distorted the edge using scissors and it cut much better using a straight edge and a razor knife with super sharp blade. Overall very happy!
ReplyDelete© Hown Store
Thank you